You are here: Home>Anchors> Hammer Drive Anchors
|
|
Hammer Drive Anchors
A 2 part anchoring system consisting of : 1- A nylon body similar in design to a blind rivet which has a cylindrical shank split on two sides, 180° apart, extending from the bottom of the shank up most of the distance to the head. The shank has several ribs extending completely around its circumference. Mushroom, pan and flat head styles are available 2- A steel or stainless steel pin when hammered through an opening in the top of the head of the nylon piece will split the ends below the head. The pin has a slot across the top of its head, a chiseled point similar to a nail, and threads on its own shank which helps to lock the anchor in place upon installation. This light duty anchor is used in solid materials such as concrete, brick and block, wallboard or plaster. Excellent for when fixtures must be attached without chipping. Good for joining several thicknesses of material together, especially in applications subject to vibration. The nylon withstands temperatures from -40°F to 170°F. More Detail |
Note：Our factory is the key supplier of Stanley®（Dewalt®/Power®）and Simpson® in China.
|
Details
Place of Origin:Zhejiang, China Brand Name：Tong Wan Model Number:Inch/metric Type:Wedge Anchor Material:Steel，Stainless steel Diameter:1/4'--1-1/4' Length:1-3/4'-12' |
Capacity:614-5520kgf Standard:ANSI Product Name:Heavy Duty Anchor Name:Anchor bolt Application:Concrete Surface treatment:Zinc Plating，hot-dipped galvanized Sample:Free |
Video |
Packing |
|
|
|
